Printing version

Features:

• The device is based on the unique Unicap TM technology of laser capnometry.
• Use of laser has allowed creating a capnometry sensor free of moving mechanical parts thereby increasing accuracy and reliability of measurements.
• This capnograph does not need calibration and/or verification with standard gases. Passage of time and usage do not affect factory calibration of the sensor.
• Small volume of measuring cuvette decreases the sample flow to 50 milliliters per minute.
• Self-test hardware inbuilt in MPR 6/1-03 TRITON allows efficient control over the key components functioning, detects the status of sensors in the autonomous regime.
• MPR 6/1-03 has an efficient multi-stage sample dehumidifying system. The device also has an in-built self-cleaning program.

 Specification:

 Capnography Channel:

• Effective sample dehumidifying system
• Automatic measurement results correction if nitrous oxide is present
• Measurement range – 0-10% (0-80 mmHg)
• Display modes: concentrations in % or partial pressure in mmHg
• Measurement accuracy: 0.2 % in the 0-5% range, 0.4% in the 5-10% range
• Breathing rate 10-200 per minute
• Displays capnogramm, EtCO2, FiCO2 breathing rate on the screen
• Adjustable alarms of high and low levels of EtCO2, and high level of FiCO2

 Alarms:

• Three-tier alarm system with audible and visual alerts
• Adjustable alarms : EtCO2 , FiCO2

Data storage:

• Trends are displayed as separate graphs for all monitored parameters and alarms
• All graphs are displayed in real time in a single window
• Data is saved with 1 minute steps, and past data can be shown anytime, with the trends displayed as a table
• Basic memory volume allows saving 48 hours of measurement in 1 minute steps
• Data storage is immune to power loss

Recordable trends:

• Е tCO2

User interface:

• Color TFT screen with active backlight (the device can be used in dimmed rooms or in a car or plane)
• Display size: 6,4 inches ( 16,26 centimeters)
• Screen resolution: 640x480 pixels
• Convenient “shuttle” manipulator allows fast and convenient operation of the device

Accessories (standard set):

• CO2 measurement set (T-connector and extension line) – 5 sets

Power supply system :

• The device can be plugged into 220V – 50GHz alternating current power supply
• The device has an in-built battery
• Battery is recharged automatically
• The device can run on battery for no less than 3 hours
• A transportable (mobile) version of MPR-6/1-03 TRITON capnograph produced for car and air ambulances can work from a standard 12 volt car socket
• Power consumption: no more than 35 VA

Size and weight:

• Size : 300 x 180 x 290 mm ± 2 mm (11,811 x 7,086 x 11,417 inches ± 0,078 inches)
• Weight: no more than 5,3 kg ( 11,68 pounds) with in-built battery